Cleaning Up Of Blood Or Bodily Fluids

According to Bio-Tec Emergency Services, LLC.
Who has provided Cleaning Up Of Blood Or Bodily Fluids in Minneapolis[https:mn[https:how Are Sensitive Onboard Electronics Handled During Cleaningbest Practices For Removing Rodent Smells In Attic Spacesmnminneapolis, , for more than 30 years.

---

Cleaning up blood or bodily fluids requires strict safety protocols because they can carry infectious pathogens like HIV and Hepatitis B.

 

Cleaning blood or bodily fluids spills yourself is unsafe and maybe illigal, contact the professionals at Bio-Tec Emergency Services, LLC 24/7 - 888-246-9111 for sameday services.

 

The process involves using personal protective equipment (PPE), a specific cleaning and disinfection procedure, and proper biohazard disposal. 

 

Required Materials 

A spill kit should include: 

• Disposable gloves (nitrile or latex, multiple pairs)
• Additional PPE (safety glasses/face shield, disposable apron/gown)
• Absorbent materials (paper towels, cloths, or absorbent granules)
• Disinfectant (an EPA-registered commercial disinfectant or a freshly made 1:10 bleach solution)
• A brush and dustpan or tongs (never use hands to pick up sharp objects)
• Biohazard disposal bags (red bags or other sealed, leak-proof containers; double-bagging is recommended)
• Soap and water for handwashing 

 

Step-by-Step Cleaning Procedure 

1. Restrict Access: Immediately block off the area to prevent others from entering or spreading the contamination.
2. Don PPE: Put on gloves and other appropriate PPE. Check for any tears or damage before starting.
3. Absorb the Spill: Use disposable towels or absorbent material to soak up the bulk of the fluid. Avoid actions that may create aerosols or splashes.
4. Remove Sharps Safely: If broken glass or other sharp objects are present, use a brush and dustpan or tongs to place them into a puncture-resistant sharps container.
5. Clean the Area: Clean the entire area thoroughly with a neutral detergent and warm water solution.
6. Disinfect the Surface:
   • Hard Surfaces: Apply the disinfectant solution (e.g., 1 part bleach to 9 parts water) and let it sit for the required contact time specified by the manufacturer (usually 10-20 minutes).
   • Carpets/Upholstery: Bleach solution may cause discoloration. Use an appropriate carpet cleaner/shampoo or a low-level disinfectant instead. Steam cleaning is also an effective option. Heavily soiled items that cannot be disinfected should be removed and disposed of as biohazard waste.
7. Wipe and Dry: Wipe up the disinfectant and allow the area to air dry.
8. Dispose of Waste: Place all contaminated disposable materials (towels, gloves, etc.) into a biohazard bag or a sealed, leak-proof plastic bag. Double-bag the waste and seal it tightly. Regulated waste often requires specialized pickup and disposal; contact your local health or environmental management service for guidance.
9. Clean Equipment: Disinfect any reusable equipment (mops, buckets, etc.) by soaking them in a bleach solution or using a facility-approved disinfectant, then rinse and air dry.
10. Personal Decontamination: Carefully remove PPE without touching the outside and discard it into the waste bag. Wash hands thoroughly with soap and warm water immediately after cleanup.